So I was going to replace one of my beepers and Dixmor timers today. When I went to open the meter I noticed my keys didn’t fit. Then I noticed someone has broke off a key or something in lock mechanism. I have no experience with drilling locks. Can anyone give me some suggestions on how to do that?
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Meter Door Locks Jammed
- Thread starter Noob
- Start date
MEP001
Well-known member
Just break the lock. Medeco locks are extremely hard to drill through, but if you're careful you can pry the door open and break the threaded post that the cam is mounted on without damaging anything. Another option is to look for a locksmith's broken key extractor, maybe you can get out whatever that is in there.
You can save a good amount of money if you replace the locks with a tubular key type, if there's no money secured by the lock. In my experience they're much less prone to tampering like that.
If you really want to drill it, check with me or I.B. Washincars. A locksmith will charge you around $200, you can buy the stuff to do it for half that.
You can save a good amount of money if you replace the locks with a tubular key type, if there's no money secured by the lock. In my experience they're much less prone to tampering like that.
If you really want to drill it, check with me or I.B. Washincars. A locksmith will charge you around $200, you can buy the stuff to do it for half that.
Earl Weiss
Well-known member
You may want to try some small metal picks like dental tools to get the piece out.
Earl Weiss
Well-known member
