OurTown
Well-known member
We have an MBD swiper paired to a standard Cryptotap on an old D/H (Radatz) vending machine with a newer updated circuit board. Since yesterday, I noticed that after a successful swipe or tap and vend, the swiper goes into "out of service" mode (flashes yellow). Power cycling it resets it but it does it again on the next swipe or tap. I emailed Cryptopay because they are closed today but wondered if anyone had this issue before. My past experiences (other issues) have been that Cryptopay blames the vending machine board and Keith at Radatz said it's always a Cryptopay issue.
