Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Mark7 Turbowash
- Thread starter JustClean
- Start date
I.B. Washincars
Car Washer Emeritus
There is one in New Albany, IN. It's on Vincennes St., I think at the corner of Elm. I stopped in as they were installing it (July 8). Most everything was installed and they had it running back and forth. They were plumbing it up while I was there, so I would think it is running by now. The main difference I could see was that it uses turbo nozzles and when it washes the front and back the upper nozzles turn off. I'm sure the next time I am there I will have to give it a try.
I.B. Washincars
Car Washer Emeritus
Actually, Mark VII had an inverted L decades ago, the Jet Clean. It's probably where all those other companies got the idea 
Actually, Mark VII had an inverted L decades ago, the Jet Clean. It's probably where all those other companies got the idea
Really? I didn't know. I googled a bit but couldn't find any photos. Must have been before they invented the camera
Bill Manke
Member
I had a jet clean back in about 1988. It lasted for about a year then switched to the rotoclean. Rotoclean wash a much better machine. Funny tory with jet clean. I was working on the drive wheels on the rail trying to get it to track right. Had the bay blocked off with a cone but had the power on. Had somebody come up move cone and put money in for a wash. I didn't see this until they were in the bay. I was up on the rail my ladder was back in the corner. so as the carriage drove around the rail I ran infront of it to my ladder. I also made this bay just big enough for the wash so over the years as I have up graded to GTO 300 I had to shave the walls with a grinder to gain as much clearance as possible.
