SuperShine
Active member
Back again, one of our LW4000 is consistently shutting down on the 3rd pass, which is our first high pressure pass. It moves across the front and then just sprays high pressure until it times out, just before the arch would do its first rotate at the drivers side front.
I have already bypassed the green 1,2,3 wires for the arch motor, with no change.
Replaced the x30 prox.
Time to change the X30 breakout wire next?
At least it is consistent, it will wash OK for about a day until it shuts down on the first high-pressure pass, driver side, just before it would rotate to move down the driver side.
I have already bypassed the green 1,2,3 wires for the arch motor, with no change.
Replaced the x30 prox.
Time to change the X30 breakout wire next?
At least it is consistent, it will wash OK for about a day until it shuts down on the first high-pressure pass, driver side, just before it would rotate to move down the driver side.
