First off, I'm a LW4000 newbie. Have owned a 5-bay self-serve for 4 years, and just bought this 2 -bay automatic last month. Both bays have the PDQ LW4000 with Unitec POS II.
BTW - as my first test, I replaced the leaking 1" swivel and boom hose yesterday (on Bay 1) - yeah !
Now, I have this intermittent problem (on Bay 2) that tells customers to "back up" but then it doesn't start. Resetting via joystick to home resolves the problem, but I want to get to the root cause.
The T-bar on the drivers side is closer in on this bay than the other, and may be blocking one of the sensors (I don't know the technical names for the sensors yet). But this T-bar is clamped with U-bolts to the overhead bridge so I don't want to mess with it needlessly. Also, I'm thinking it may have always been like this.
It started a week ago, and does this almost once a day, but I've had a few days with no problems.
The fault code on the printout is always "Entrance Timeout" code 55. Any input is appreciated.
BTW - as my first test, I replaced the leaking 1" swivel and boom hose yesterday (on Bay 1) - yeah !
Now, I have this intermittent problem (on Bay 2) that tells customers to "back up" but then it doesn't start. Resetting via joystick to home resolves the problem, but I want to get to the root cause.
The T-bar on the drivers side is closer in on this bay than the other, and may be blocking one of the sensors (I don't know the technical names for the sensors yet). But this T-bar is clamped with U-bolts to the overhead bridge so I don't want to mess with it needlessly. Also, I'm thinking it may have always been like this.
It started a week ago, and does this almost once a day, but I've had a few days with no problems.
The fault code on the printout is always "Entrance Timeout" code 55. Any input is appreciated.