What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Laying out POS for IBA.

A

APW

Well-known member
My installer for my IBA is out of pocket and I need help with positioning my POS. My block guys are ready to block it tomorrow. My opening is 10' on my bay. How many inches from center of my opening should I put the front of my POS?
 
Almaprowash said:
My installer for my IBA is out of pocket and I need help with positioning my POS. My block guys are ready to block it tomorrow. My opening is 10' on my bay. How many inches from center of my opening should I put the front of my POS?
Click to expand...

Typically the face of the teller should be 4'6" from the center line of your door opening. It should also be located a minimum of 12' from the building
 
ken-pro said:
Typically the face of the teller should be 4'6" from the center line of your door opening. It should also be located a minimum of 12' from the building
Click to expand...

Is that assuming that the equipment is exactly centered in the bay? If it were me, I would base my measurement on the centerline of the equipment. I'm assuming this is a retro-fit and could possibly not be centered. I have 7 autos and don't think any of them are.
 
I.B. Washincars said:
Is that assuming that the equipment is exactly centered in the bay? If it were me, I would base my measurement on the centerline of the equipment. I'm assuming this is a retro-fit and could possibly not be centered. I have 7 autos and don't think any of them are.
Click to expand...

Agreed. 4'6" should be from the centerline of the equipment, not the door opening.
 
You must log in or register to reply here.
Back
Top