Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Laser 4000 to High Velocity conversion
- Thread starter Jim H.
- Start date
lag
Member
We have done a number of these conversions. Our experience with the Washworld equipment is very positive. I would not hesitate to recommend doing the conversion.
We decided to do it, because we were looking at being able to access, our equipment remotely. The VS2 system and virtual attendant was the icing on the cake for us. I really liked the idea of using our T bar eyes, as stop, and back up eyes..
We replaced our J0s, and added the side sonar for measuring only; we already had stainless wash equipment so there was no need for us to change the carriage in the bay.
I have PMed you my contact info if I can answer any questions.
We decided to do it, because we were looking at being able to access, our equipment remotely. The VS2 system and virtual attendant was the icing on the cake for us. I really liked the idea of using our T bar eyes, as stop, and back up eyes..
We replaced our J0s, and added the side sonar for measuring only; we already had stainless wash equipment so there was no need for us to change the carriage in the bay.
I have PMed you my contact info if I can answer any questions.
