J jnot002 New member Joined Feb 10, 2024 Messages 2 Reaction score 0 Points 1 Feb 10, 2024 #1 Laser 360 says trolly system stop active. What can be causing this error?
Monte Member Joined Apr 30, 2020 Messages 88 Reaction score 47 Points 18 Feb 10, 2024 #2 Is the system stop relay lit on the bridge?? If the switches are all clear, but relay not powered...probably broken wire in cord to bridge
Is the system stop relay lit on the bridge?? If the switches are all clear, but relay not powered...probably broken wire in cord to bridge
Z Zal Active member Joined Feb 10, 2019 Messages 195 Reaction score 82 Points 28 Location Illinois Feb 13, 2024 #3 If the stop is in the bay it probably has water intrusion. You can temporarily disconnect in the pump box. It should be labeled.
If the stop is in the bay it probably has water intrusion. You can temporarily disconnect in the pump box. It should be labeled.
U Undertaker II New member Joined Apr 15, 2019 Messages 28 Reaction score 9 Points 3 Feb 14, 2024 #4 I had this happen a couple years back and ended up being a bad node board.
