Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Injectors
- Thread starter fivebucks
- Start date
Bubbles Galore
Active member
Not familiar with them. What is happening?
DiamondWash
Well-known member
I take it you are useing them right now or or you just asking the question if they are corrosion resistant? I am current useing them and have had no problems with them.
fivebucks:
We have been using the ChemFlex Kynar plastic injectors for about 2 years now on our Washworld equipment - They are definitely better than the original SS injectors. My low PH presoak was killing SS injectors in 3-4 months, Now I can get a year out of a set of plastic injectors. The SS portion of the ChemFlex injector still corrodes with time, and a year is pretty well the max expected life with low PH. They seem to last much longer with high PH chemical
One note - Make sure you test draw rates and titrate after changing to them - They seem to require one larger orifice size to draw the same amount of chemical as the SS injectors.
We have been using the ChemFlex Kynar plastic injectors for about 2 years now on our Washworld equipment - They are definitely better than the original SS injectors. My low PH presoak was killing SS injectors in 3-4 months, Now I can get a year out of a set of plastic injectors. The SS portion of the ChemFlex injector still corrodes with time, and a year is pretty well the max expected life with low PH. They seem to last much longer with high PH chemical
One note - Make sure you test draw rates and titrate after changing to them - They seem to require one larger orifice size to draw the same amount of chemical as the SS injectors.