What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Hamilton ACW makes new noise.

Waxman

Super Moderator
My autocashier has a noisy fan/motor. Probably should fix berfore it gets so cold that my fingers go numb whilst screwdrivering gloveless.

Anybody got a tip for me?

TIA/wax
 
My ACW 4s and 5s haven't had fans for years. It's probably no big deal if it works or not. Maybe if it was facing the sun all day in Phoenix, but in MA I doubt if heat would ever be an issue.
 
I think a thermister controlled the fan, and only came on when really hot. My fan has been long gone, but the hamilton still uses the heat tape when really cold.
 
My ACW fan was making a noise. Saturday, (when I took out the controller to solder in the new and wonderful display) I got from Randy, I found that the fan grill, was rubbing the fan blades making the noise. Note: The controller doesn't need to be removed to get to my fan. Just tossed that in for the opportunity brag about my new Dixmore Red display again! Picture link of what I call the fan grill below:

http://www.alphawareinfo.com/accessories/200X200/FAN-grill.jpg
 
Back
Top