Gs 101 vac timer

[jrecchi]

Ineed to get a new vac timer for one of my vacs.It currently uses a GS-101. Since they are not available any longer,can anyone tell what the current equivalent timer model would be?

Thanks

 

[Dan kamsickas]

Ineed to get a new vac timer for one of my vacs.It currently uses a GS-101. Since they are not available any longer,can anyone tell what the current equivalent timer model would be?

Thanks

The replacement is a GS403. The technical sheet has a wiring diagram that shows how to wire it when you are replacing a GS101.

 

[waterway]

Etowah Valley

Look at etowahvalley. The flat pack timer is almost half the price of the gs403 and has worked well for me. I'm currently in the process of switching over all of my gs403 timers as the go bad.http://www.etowahvalleyequipment.com/timers.html

 

[Randy]

We’ve been using the $38.99 KR #TIKR540 Vac Timer with good results. You always want to install a Mercury relay on the load side of the Timer. This will prolong the life of the Timer and prevent the Timer from being damaged should a motor short out.