Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
general pump has water in it
- Thread starter tntmck
- Start date
MEP001
Well-known member
You might plan on replacing every seal in the head. The seal kit won't come with the o-rings that go around the seal retainers, so you should order those. It also won't come with the head rings that go under the high-pressure seals.
The water in the oil is usually caused by a cracked plunger or a leaking plunger seal. The plunger bolt kit will come with everything for the plunger seals. I always replace the oil seals when water has gotten into the crankcase - the spring rusts and will eventually break, at which point it will start leaking oil.
The water in the oil is usually caused by a cracked plunger or a leaking plunger seal. The plunger bolt kit will come with everything for the plunger seals. I always replace the oil seals when water has gotten into the crankcase - the spring rusts and will eventually break, at which point it will start leaking oil.
