What's new

Galvanized Metal in Bays

wrightwash

Member
Joined
Aug 17, 2020
Messages
80
Reaction score
23
Points
8
Location
Middle Tennessee
Is anyone using Galvanized roofing metal in their bays? I was thinking of using this overhead in our bays to cover up exposed trusses.
 

wrightwash

Member
Joined
Aug 17, 2020
Messages
80
Reaction score
23
Points
8
Location
Middle Tennessee

sparkey

Active member
Joined
May 22, 2010
Messages
901
Reaction score
182
Points
43
Location
Ohio
A lot of the companies that form the metal roofing can also roll it out of aluminum sheet. I just did a bay ceiling with the aluminum sheet and it looks good.
 

Rfreeman

Well-known member
Joined
Aug 4, 2014
Messages
740
Reaction score
408
Points
63
Location
Ft. Worth
One of my washes has R panel for the roof and the walls. Has held up well over time considering its approx. 15-20 years old. I purchased the wash 3 years ago and we use straight muratic acid to wash the walls about every 2 months and still holding up.
 

Randy

Well-known member
Joined
Sep 5, 2007
Messages
5,626
Reaction score
1,913
Points
113
We use bright white metal roofing on the ceiling of our washes. It's heard up well in the last 38 years. It goes up fast. They are 15' or 20' long.
 

wrightwash

Member
Joined
Aug 17, 2020
Messages
80
Reaction score
23
Points
8
Location
Middle Tennessee
One of my washes has R panel for the roof and the walls. Has held up well over time considering its approx. 15-20 years old. I purchased the wash 3 years ago and we use straight muratic acid to wash the walls about every 2 months and still holding up.
Thanks! Are you using galvanized or just standard metal?
 
Top