Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Deublin or Mosmatic Swivels
- Thread starter washer377
- Start date
-
- Tags
- #swivel #selfserve
AnalyticWash
Well-known member
Mosmatic is very good. Expensive.
Deublin are also very good. Very very expensive to outfit a whole site with them though.
Both are way better than a cheap $7 swivel.
Deublin are also very good. Very very expensive to outfit a whole site with them though.
Both are way better than a cheap $7 swivel.
It sounds like you might be asking about Self Serve hose swivels.
Mosmatic.
If you are asking about Automatic Bay swivels......BIG BOY.
I use a 3/4" in my auto bay, and the Big Boy's are rebuildable. I measured the ORings with a micrometer, and ordered bulk ORings from Orings.com. I can reseal a swivel for less than a dollar. FWIW, the 3/4" uses R20-2rs bearings. I find them on sale, and replace the bearings whenever I replace the seals.
You'll need to build or buy a spanner wrench to get the end caps off.
Mosmatic.
If you are asking about Automatic Bay swivels......BIG BOY.
I use a 3/4" in my auto bay, and the Big Boy's are rebuildable. I measured the ORings with a micrometer, and ordered bulk ORings from Orings.com. I can reseal a swivel for less than a dollar. FWIW, the 3/4" uses R20-2rs bearings. I find them on sale, and replace the bearings whenever I replace the seals.
You'll need to build or buy a spanner wrench to get the end caps off.
