What's new

D&S 5000 troubleshooting

Strava

Active member
Joined
Feb 14, 2021
Messages
120
Reaction score
53
Points
28
I'm at a loss on how to fix this issue. I was hoping someone here could help. I have soap, and what seems to be small amounts of oil coming into my rinse tank. I also have hot water coming up from the bottom of the rinse tank from where the 3535 pump sucks the water.
 

Attachments

Strava

Active member
Joined
Feb 14, 2021
Messages
120
Reaction score
53
Points
28
The two lines coming into the pump in the 3 & 4th pictures are how I think the hot water is coming into the tank as they are hot to the touch. I don't see any check valves between the pump and here so not sure what has changed to cause the issue.
 

Strava

Active member
Joined
Feb 14, 2021
Messages
120
Reaction score
53
Points
28
On a side note, How is it to call D&S tech support? I can't imagine them wanting to help me with a 20-year-old machine.
 

Strava

Active member
Joined
Feb 14, 2021
Messages
120
Reaction score
53
Points
28
Another question while I’m in a roll. Do these go bad?
 

Attachments

Waxman

Super Moderator
Joined
Aug 31, 2007
Messages
5,861
Reaction score
1,364
Points
113
Location
Orange, MA
yes chemical injectors go bad. theres a little spring and ball inside that can get gunked up etc and not let presoak thru.
 

Jim64

Active member
Joined
Sep 17, 2018
Messages
113
Reaction score
38
Points
28
Location
TN
Just had the identical issue. My soap valve was bad and forced presoak into my rinse tank causing foam. The valve body had warn thin and would not seal. Replaces the whole valve, 573p I believe. Problem fixed. It took me a while to figure that out.
 

Strava

Active member
Joined
Feb 14, 2021
Messages
120
Reaction score
53
Points
28
Thats great! I'm glad you found the problem. I'm ordering new valves now to see if that fix will work for me. Thank you for posting. : )

This is the valve that I'm going to use to replace the two in picture# 4



On a side note, I'm looking at all the different kinds of valves and I came across these two. I was hoping someone could explain to me the price difference between the two and why the cheaper one appears to be better.
Cheap https://www.kleen-ritecorp.com/p-1758-smc-6010090-brass-1-4-m-x-1-4-m-check-ball-valve-2500-psi.aspx
More expensive https://www.kleen-ritecorp.com/p-17...x-1-4-inch-male-npt-viton-o-ring-800-psi.aspx
 

Jim64

Active member
Joined
Sep 17, 2018
Messages
113
Reaction score
38
Points
28
Location
TN
The valve I replaced was the Dema 573, the one in picture 5 labeled soap.
 

Strava

Active member
Joined
Feb 14, 2021
Messages
120
Reaction score
53
Points
28
Is the thing in the red circle a check valve?

IMG_0901.jpg
 

Jim64

Active member
Joined
Sep 17, 2018
Messages
113
Reaction score
38
Points
28
Location
TN
Its an air operated diverter, they are usually used to divert from rinse water to spot free.
 

Strava

Active member
Joined
Feb 14, 2021
Messages
120
Reaction score
53
Points
28
Its an air operated diverter, they are usually used to divert from rinse water to spot free.
Thank you for the response. I am having a problem with hot water and soap coming into the rinse tank. Do you think the air operated diverter could be the issue? IMG_09011.jpg
 

Jim64

Active member
Joined
Sep 17, 2018
Messages
113
Reaction score
38
Points
28
Location
TN
No, I think you have a dema 573 valve that needs replacing
 
Top