waterlogged
Member
Is there more to the wiring than just the green and yellow wires from the CAW to the AMTT. I don't have any comms with anything. Is there a step that I am missing??
CAW Touch to AMTT
- Thread starter waterlogged
- Start date
RykoPro
Technician/Manager
The AMTT will only run off of Ryko net and requires just one cable (18 gauge two wire shielded cable). There are only a few cables Ryko wants you to use although I have tried others with no problems. Look on the cable and see what brand and # is on the side to verify you have the correct one. I can provide a list of acceptable cables if you need it.
waterlogged
Member
Any shielded pair of 18AWG cables should work. Right??
RykoPro
Technician/Manager
Ryko says to only use these cables:
Belden 8760
Belden 9318
Alpha 2421C
Carol C2521
Carol C2534
Belden 88760
MANHATTEN 13242
Other cables may work but this is what they know will work without issues.
Belden 8760
Belden 9318
Alpha 2421C
Carol C2521
Carol C2534
Belden 88760
MANHATTEN 13242
Other cables may work but this is what they know will work without issues.
