What type of air drying/ moisture separating system would you recommend for the air coming out of the air compressor? We were told that there are refrigeration type units that work well in our part of the world, but we don't remember what brand, type they recommended.
Here are the things we've done to help with the moisture problem: Outside air intake for the compressor, on the bottom of the tank an automatic blow out on a timer, ball valves in several places that we open daily, bowl type filters that we empty daily, flowjet filters at equipment. The flowjet filters work well, our flow jets are living longer and decreased failure rate. We have several of the flowjet air filters and they blow a small amount of air ALL of the time, causing the air compressor to run too much, & the electric meter to spin.
It's been along time since I've posted, please be gentle if I didn't do this correctly.
Here are the things we've done to help with the moisture problem: Outside air intake for the compressor, on the bottom of the tank an automatic blow out on a timer, ball valves in several places that we open daily, bowl type filters that we empty daily, flowjet filters at equipment. The flowjet filters work well, our flow jets are living longer and decreased failure rate. We have several of the flowjet air filters and they blow a small amount of air ALL of the time, causing the air compressor to run too much, & the electric meter to spin.
It's been along time since I've posted, please be gentle if I didn't do this correctly.