Search results

Hello all, Have a ryko Code- a- wash and is stuck with old managers pass code- Pass word. Cant seem to figure out how to get by it or delete it all together? I would like to get in and re do some things. Is there a universal password? I do have the key board for programing, it does say "edit...

Hello all, Any help with a grundfos cr16 pump for Ryko high impact? No pressure at all and all sorts of metal in the water lines. Better to rebuild? Replace? Where could I buy one other than Ryko? Anybody have one for sale? Thanks in advance..

Would anybody have an input/output list for a Ryco softgloss and a Ryco Voyager with omron plc? Thanks in advance..

was the switch in "test" mode?

I take the guts out of the rotating nozzle tap the end with an 1/8th pipe tap and screw in a nozzle. The new stainless steal nozzles seem to be working fine and last a lot longer.

Thanks Randy, No codes other than a 62. I messed with this all weekend and still don't work. When it fails while it is still in emergency rinse these are the inputs and outputs 40,41,45,46,50,55,66,70 out- 22,23,27,31,32,33,75 I am getting all the proper i/o and "enter code" before we try to...

I have a quick solution to your nozzle problem, Took me many years before it dawned on me. Both the side and top nozzles are very easy to fix with no money spent. This is how i do it..... I take the nozzle apart pull the guts out put a screw driver in the end and pop out the o-ring with the...

Thanks for the help, I have checked those tires numerouse times but I didnt check every flag on top I will do it in the A.M. The ultrasonic sensors were removed from this unit some time ago is there a chance that might have something to do with it? I had this problem before on other rykos and it...

Monarch 2 high impact. The problem I am having is, Pull the car in the machine will soap rear to front then soak time. It will go into the rocker panel and then tires. When the machine goes to high impact rinse the arm will rotate to rinse the rear of the car from LR to RR it will rinse the...

Thanks for the answers, My whole problem was low pressure soap solenoid (Top). This thing is strange, on the best wash #4 it makes 2 low pressure soap passes followed by 2 high pressure passes, followed by 1 low pressure drying agent, followed high pressure clearcoat, then at last a R.O pass...

Hello all, I am very familiar with most washes except the PDQ laser 4000. After numerous hours spent getting this machine up and running flat tires, broken wheels, loose belts and the list goes on. I finally got it up and running washed a couple of cars with no problem. Went back into the...

Green means are there surfactants being used in the chemical like nonle-phenoly (spelling). Its hard to get "green" chemicals in the wash world but they are available.

I personally like Mark 7 units because they are simple to work on and keep running. PARTS and service is key! If your machine is down are all the parts available that day? No matter what happens can that machine be up and running that day?

zep chems I have used ZEP for years. The one thing i can tell you is you do get what you pay for. 75-1 is to lean. That film you have been talking about is bar none the hardest thing to get off. Is your water softener working OK? Are you a one step or a 2 step? Whats your dwell time? If you use...

Sorry, didn't mean for it to come out that way.

I am in the chemical part of this business. The one thing you always have to look at is COST PER CAR Only!! Cost per gallon means nothing! How much water are you putting on per car? What is the dilution rate you would like to have? What dispensing system do you have? A 40-1 product is a lot...

Hello all, I have 2 machines 1 RYKO (old) and 1 Mark 7 gt. This is what I want to do please tell me if it is possible? The RYKO machine I can set to make 1 pass soap then high pressure, soap again then high pressure again. I get no complaints from customers and I get a very clean car. I would...