Search results

He got me got a few thousand many years ago. I paid with a credit card for 1/2 of it and was able to get that back. Bad man.

Contact Burl at Xcel electronics 630-932-4234. He cut his teeth on those hoppers and can still fix.

How much for all three? Do you any pictures of the coins side?

Gear Boxes wear out. The two gears get sloppy. Check to make sure the drive shaft couplings are tight to the shafts. I would replace the gear box If that is number one suspect.

We have used the ginsan GS16 D, my old favorite for larger sites with 12 inputs. The new version doesn’t have more inputs than the IDX, tho . I have had good luck with the IDX. We had one go out recently when we had a big water leak, but it did not get wet tho must of been humidity. If you are...

We save all the old electronic stuff when we strip them down.

I don’t have doors, but we use a rear door eye to turn off the dryer. I know in the last versions of software you can make the doors, temperature and or time activated. You can have the doors stay open above a certain temp and or certain time of the day.

We purchased the Hamilton app since the day they offered it and have sold a wash club as soon as that feature became available. We limit it to one wash a day at any of our six IBA sites. The club revenue is now some real money. It has been worth it, and continues to grow considerably each...

Something on the high pressure 24 volt is drawing to much current amperage. Solenoid? Contactor? Wire short? Relay? If it is happening with soap, wax, and rinse I would guess something for the controls for the rinse function. Not the pump or motor for rinse tho, what ever turns it on is drawing...

We have never lost $1 in a National Pride coin/bill box. Best thing we ever did in the self serve was bill boxes for revenue, second would be credit cards, third would be $1 unique tokens. We have 40 bays set up like that.

This is our 1/4” thick National Pride box at our Chicago wash, from 2020. The neighborhood was in Covid chaos. They never got into it tho. They cut the lock bar off. Then Started cutting the welds on top. We bent it back with a big adjustable and rewelded it. We believe in the thickest...

PIC 1 is a Coleman Shampoo Vac. Should fit perfect. I have done it.

PIC 1 is a Coleman Shampoo Vac. Should fit perfect. I have done it.

Coleman makes a bar and lock guard you can add to that. You will need to drill two large holes and weld the guard on.

Is your Laserwash 4000 dumping weep at 50 degrees? Do you turn the laser off then on to fix this problem. I have an A5000 CPU version 21 that fixes the stuck temp probe issue. We have been running it a few years now. Works great. It will save on water and keep your tbars eyes from overheating...

Version 21 behaves like version 20 with option codes and all the same features of 20 with Laserminder. You need to know your option code numbers, but no call needed to PDQ. You just need the upgraded stainless collar and impact shark fin for the impact Reset like version 20. I would also change...

I have a version 21 that fixes the temp prob issue. We have been running it a few years now. Works great. The original programmer Alvin made the fix for me. I also had him fix the Goldline pulse and a stuck in bay issue. Let me know if you would like to purchase one. It can burn a chip for $100...

In our experience, sending that much water into the bottom of a engine can result in stalling out the car. Maybe things have improved for that tho.

We have 4 M5 and we are adding 3 more. Replaced steel 4000. We are keeping 7 stainless 4000 running tho. All good machines