Search results

replaced a Hypro 2414 with a Hypro 2410

Thank you, I think you might have nailed it .. The new pump draws 5 gallons per minute /the old one draws 8 gallons per minute..I might try to throttle the hot water down some .

The main water is gravity fed on all functions ..The hot water is fed from a solenoid valve. so the hot pressure water from the solenoid is overriding everything ,keeping it from pulling soap thru the other solenoid? . what's strange is the soap and hot water was working before I swapped pumps.

YES, From On Demand

Still no soap .. The setup is . the water source from stainless tank (1 Inch gravity flow to the pump ) and 3 solenoids inline before the pump .. 1 for clear coat ,1 for pressurized from city -hot water and 1 for soap(gravity from check valve in stainless tank).. when soap wash is selected I...

I have 2 SS bays ,one of the bays and pump dispense soap .during wash ... The new pump does not put soap ot with wash..They both use same line ..and check valve from tank. They each have a solenoid at the pump to let soap com in to the lines.

no soap on high pressure ..hypro 2410 .. seems like its actually putting water in the soap tank ,through the check valve

Thanks Randy,You were Spot On ....The Temp Sensor was bad..

I have a single tank WS .I will check the cams .Maybe do a regen to see if it helps.

Got to the carwash yesterday and the customer said they had to rinse with spot free rinse ,due to no water on high pressure rinse..Got in equip room and everythinng was bouncing off the wall,,flojets were hammering ,air compressor running ,no water in resorvoir tank..After checking everything...

My Weep Miser 1000 shows -22/ Had to cut water off to the weep system...Is there a reset or any way to check the Temperature sensor?

Thanks Guys for the replies//Steve

I have 4 55 Gallon Trash Barrels at the wash and I am getting way too much household trashbags and large debri...I need to make a TeePee or some type of top for these plastic barrels..anyone that has come up with something or knows where to buy some lids?

Thanks for all the advise!

I have 2 fragramatics and someone keeps leaving the doors unlatched and open//They are getting the change out..I don't mind the change thieves but do mind them leaving doors open..I put locks on but they just pop the latches off...looks like the latches arent long enough for a secure latch...any...

I have been buying mine on EbAy/ I got about 10 months out of each 5x8 flag / I think I paid around $20 each

Cajun Math A Houston construction site boss was interviewing men for a job, when along came a Louisana Cajun. I'm not hiring any Cajuns, the foreman thought to himself, so he made up a test to avoid hiring the Cajun without getting into an argument. "Here's your first question," the...

Thanks, For the extra Info/

Wow, I didn't realize the on demands have been around that long! The Open System is just a 55 Gallon Barrel with no top on it,where the air escapes as needed I assume?Thank You Very Much for the reply// Steve

I have a small 3 bay wash/ I live in Tennessee /sometimes cold winters/sometimes mild/ Is there a way to have floor heat without using the big boilers / I have seen post talking about on demand..can someone give me an idea how I would connect this to my floor heat pipes? Thanks