Search results

👍

I tried several different tips, spent three hours on the phone with jbs tech guys, even installed foam generators on the roof. No dice. Was the jbs pink glow foam just as a trial run and it flat out didn’t foam. Water beading was incredible, but it didn’t look like a good product at all coming...

How are you getting it to foam? I tried everything and it just came out soupy and my customers didn’t like it all, came from something that came out more like foam brush.

I thought about that and asked the JBS rep, he said that the red (the one I’m having the trouble with) does the lions share of the work as far as actual ceramic content getting to the car.

I completely agree! If it comes down to it I will, just won’t be happy doing it. 🤣 On that note, do you think regular bay soap would help? I’d dump a quart or so in the 5gal and try. I did. They had me completely remove the tip from the hydrominder and hook the suction hose back up. Still no...

I mean, that would work. I wouldn’t feel good about paying a premium for a supposedly top shelf product that doesn’t do what it’s advertised to do though.

I get the form over function, I’ve had people leave because of this runny product, and had people tell me they won’t be back because we don’t have a product that beads the water up. Not sure what direction to go as far as that is concerned.

Problem with all bays. My adjustments are made using the black pressure regulators in the picture. One feeding air to the flojet to control liquid volume, one on the bank of solenoids that control air. Separate lines run to the bay, where the combine at the T and then go down to the boom. I have...

Trying to switch my triple foam unit over to the jbs ceramic foam. I only bought one color (red) to see if I would like it. For the life of me I can’t get it to foam? Air and chemical line come together on the roof, above the boom. Different tips, more air, less chemical, different hydrominder...

I don’t know what else to call it, but the double tip setup for the hydro minder that sucks up some of what is in the mix tank as well as pure concentrate. I’ll get a picture.

Sorry it took me a little bit. Here are a couple pictures. Not easy to pry on, very tight, holds negative pressure for the suction still. The original door and hinge are still there, just a different way to secure and deter casual prying and damage. Just as much trouble to get into now as a...

Is there a chart where I can find what tips to use for the dilution I’m trying to get? I have an existing turtle valve that is installed and I’m trying to get to a dilution of 240:1. I’m hesitant to use the tiny pink tip just by itselffor fear of clogging all the time (pump rooms get dusty and...

I took the lock plates and hinge off. Had some thing flexible steel cut to the circumference of the vac. Put it over the lower portion of the vacuum, all the way around. The two ends of the new “wrap” have the L shaped locking plates, each having the holes for lock. The middle is locked, the top...

I’ve used the Cat 310 and the sleeved 310, they’re good, but get amazingly loud when there are 7 running at the same time. Trying to find something that won’t cause me tinnitus in two months haha.

What are you replacing them with? I’m in the same situation.

Switching away from scotch plaid, what do you recommend? Expensive is okay, I don’t use a lot of it, but it needs to be outstanding. What do you guys have for me?