Search results

I’ll give it a try thanks

Is there a code for a PDQ M5 remote to turn on just the dryers?

Is there a code for the remote to turn on just the dryers

saw your reply about pricing (good). where are you located and can you give me the numbers off the units t.o compare to my old ones

Ok. Thanks

Our tech has nor been able to locate the sensors that detect the sides of the car. if anyone is useing PDQ M 5 what sensors are you replacing them with or if you know where to purchase the original type please reply. thanks

Thanks for the reply. Looks like we have time to try and learn about the RO system.

Trying to learn a little about a RO system. The digital display for water quality fluctuates between 2 and 8, at what reading should the membrane be changed? Thanks

we have 2 M5s we had the car wash for about 6 months replaced both high pressure pumps and many sensors. Still learning as we go

Ok thanks I’ll look into getting one

Ok thanks I’ll look for it

I guess i need to figure how many gallons of water is used during soap and wax application donyou guys have any suggestions on how to calculate it?

Do you use the immersion heater in conjunction with the on demand water heater or does the immersion heater replace the on demand water heater? I assume the electric immersion heater would add a significant increase in utility cost? thanks for the help

We have a pdq m5. We have a on demand water heater that feeds into a reservoir tank. Water temp is set at 133 F. But The water in the tank is much cooler. Do you guys have any suggestions to keep the water hot? Is it feasible to feed the hot water directly into the chemical pump. Does anyone...

We think we have it fixed. The rotation hub the 3 sensors look for was extremely rusty. We wire brush the surfaces and ran it for a day then replaced all 3 sensors just to play safe. Have not had any more problems since. When it was rotating the wrong way we damaged a customers passenger...

Ok GUYS. Looking for opinions. On. M5 the arm will rotate the wrong direction once in a while. It has done it on the first soap pass and other times it will rotate the wrong direction on rinse pass. at first I thought it was a error in the wash program but it has done this on multiple...

Ok thanks

So you lightly wipe the rollers rolling surface lightly with grease?