Search results

i have a self serve bay from D&S. Normally when you put the $ in the selections will have a blinking button. Once you push the selection the light is solid. When you put $ in now and push the selection the buttons remain blinking and won’t come on. I opened the cabinet and checked the fuse and...

I have a DS vac that wont start. Has been working fine for years. I replaced the timer but still nothing. Any idea where to start looking ?

I have two ss bays, when I run the high pressure in one bay a lot of water is coming out of the wand on the other bay. Where do I look for problems?

I have a couple 18 year old Hamilton goldline auto cashiers. I replaced both with new controllers last year for the new Hamilton app. In one machine I haven’t been able to accept cash for months because the hopper pays out too much change. If you put in a $1 and hit refund it gives you $6.75 in...

..

I have a weep system I set on 30 degrees for two as bays in the winter. It’s fed with water from the main line on the left and also a line from the ss bays on the right. I put a new solenoid on last week because it was running all summer. It’s still running, when I turn it to 30 degrees it will...

I have a new Washworld Razor. I have it set up as one pass presoak, one pass bug assault, one pass presoak, arch rinse with extra pass on front and rear, lava, trifoam, arch rinse, drying agent,rain ex, spot free, blowers. my tips are set as: Blue coral citrus presoak Tan Blue coral booster...

we have 2 self serve bays. I have recently had the trickle system on for each foam brush and high pressure line in each bays as the temps have been in the low teens lately. two days ago I noticed pink soap dripping from the ceiling. I crawled up and fixed the leak in the foam brush line. the...

Is this the worst 6 months car wash business in the mid atlantic region or am I just a ****ty operator?

Before I get called out again, I called an electrician and paid $250 and compressor still not working. 3 phase Compressor was running all the time and kicking breaker, pressure switch was leaking. replaced the pressure switch before I realized the check valve was bad,replaced the check valve...

What are the best Car wash bay doors for the best price? need 4, does anyone have any used ones? 12x10

I turned up the psi on our self serve bay. in doing so when customers were using it would cut off during the time. if I pushed the reset button under the contactor it would come back on. now the contactor has locked up. I replaced both the contactor and piece below it and it still wont come on...

I have a new ISTOBAL M1 and an older Hamilton Goldline changer. More often than not I will get an error...…. when you insert cash or cc at the pay station, it will take your $ and say "please wait till the wash bay is empty" and no car is in the bay, and it will never clear so you wait and wait...

Birds got into the gantry of our Ds 5000 and all the wires got wrapped around the shaft and broke, couldn't be any worse. If anyone has a wire diagram of the 2003 DS5000 gantry it would be much appreciated. encoder and front safety all will not come on, I think we may only have a couple wires...

I have a D&S 5 column vending machine. When you deposit quarters it registers the coins. when you make either selection nothing happens, no noise like its trying to dispense and the credit clears. with all the slides down if you hit column 1,3,4,5 solenoid at top, each will lock up column 2. I'm...

low pressure tire cleaner and presoak spit air sometimes and a little product sometimes then sometimes nothing. the pump is working but not sure its getting product. is there a solenoid for air and product? could the air solenoid be bad if its spiting product and air inconsistently?

Hello everyone its been awhile. I have two self serve bays. one ss bay the foam brush is all liquid, the other bay foam is perfect. they both feed from same pump and same tank. What can be the problem?

Been having a lot of issues with the prox that drives the shaft, then had a hydrolic leak. Now that leak is fixed if I run the gantry on manual override it will go 4 or 5 feet cuts off and exit light comes on. reset and it does it again. Another new issue........ could it still be the prox? Does...

Does anyone have any idea why side spinners will not turn on one side of gantry on high pressure moving from front to rear? They spin on high pressure moving forward but will not spin on high pressure moving to rear of vehicle. There are three swivels I believe. I am totally perplexed........

Recently the power blast nozzles have quit coming on in the wash cycle? I replaced the relay that was not it!!!!