Search results

Sad to hear this, RIP @MEP001

@MEP001 Get well soon!

Thank you guys for the guidance.

Having the carbon in the sediment filter should not harm, that is what I thought. I don't remember the pump pressure when it ran successfully. Here is the screenshot of the CH pump.

I replaced the sediment filter two weeks ago (Amazon link: here), and it should be fine. We have 2 the KR membranes https://www.kleen-ritecorp.com/p-44539-kleen-rite-reverse-osmosis-membrane-4-x-40-inches-2500-gpd.aspx. I remember we replaced the booster pump four months ago. I'm unsure about...

Its the static pressure, I will check the pressure when it is flowing.

Nope, I have checked the carbon filter and sediment filter, we have around 50 PSI. It looks normal.

Hello! I have a Coleman Hanna RO system. I currently use a Lowes booster pump (https://www.lowes.com/pd/Utilitech-1-HP-Stainless-Steel-Lawn-Pump/1000678113) to push water from the sediment filter to the membrane. However, we're experiencing low water flow in the flow meter even after replacing...

Yes, I do. I don't have enough slots to put separate CB for blowers. I am thinking of using a new sub-panel or use the motors breakers (that I learned now).

This is interesting, I never thought we can wire it off the same breaker as my pump is. As @Kimberly Berg mentioned I was also planning to put another panel that is going to cost me $4k. I want to go with 3 phase panel if I have to put in a new one, but having a single-phase blower for 5 bays...

Gotcha, thanks.

Can you guys help me with the KR part #, I see a few options on the website but does not match exactly what I have. I am looking for DEMA 453P. Thank you in advance.

The coil was bad. I want to keep a backup (valve + coil) just in case I need it in the future. This solenoid is used to turn on the backwash of the RO system.

Yes you are right! It's used for the RO.

Can someone help me to share a KR link for this Solenoid? I did find one, but I was not sure if I have the right one. TIA.

Hello All - We have a Coleman Hanna vending machine as seen here http://colemanhanna.com/equipment/self-service/self-serve-support-equipment/vending-systems/ and also CryptoPay integrated. It accepts $1 tokens and Quarters. We currently accept $1 and plan to bump it to $1.50 How can I do it...

What should I check for this?

It turns out that my tire cleaner mixture was not strong enough. My pump was pushing moist air as the product was weak. When I added more tire cleaner product to the mixture tank, it worked. So I increased the metering tip, thinking it will solve the issue. But it stopped again yesterday and it...

I am suspecting it is, as I can feel the motor gets hot when it runs. I will check it out. Also I did remove the hose that connects to the check valve, I could see the liquid getting pumped but maybe it does not have enough PSI.

Where can I add this check valve? I don't want the liquid the go back to the product mixture tank if there is a bad plunger.