Search results

Jobe for me and no problems

I’ve been using Kleen Rite since 2003 and never had any issues that could not be resolved with one phone call. I take advantage of the free shipping specials and use points for other shipping costs. I wish everyone I dealt with was as easy. Maybe I have been lucky, but so far they are my go...

Yes, been running for three weeks. I like it.

Had the same sealcoat problem, I tried several cleaners then tapped out.

I have an Oasis XP that should be installed in mid July. I am 100% touch free auto guy. In my area it gives me an option to offer in place of the tunnels, and they are everywhere. Good luck, there are a lot of great machines out there.

Looks like you have one solenoid mounted near your pump. That’s likely your soap wash, was the soap wash your hot water issue?

I had a relay go bad in a fragra matic vac and caused the same issue

Thanks Randy, i read their info on the link you sent. Do you do a swap or wait on your original head?

At that point the head should be same as new? Throw in another 75 for shipping and 80 for a new seal kit and it’s at $380. What’s a new one, around $600?

Thanks guys, gotta be the head. I thought cat would do a one time resleeve at no charge. If not then any idea what to expect on that cost?

No backfeed, all the valves are good. The pulsating is very slight. Probably only a Carwash guy could notice it. I think it is in the head but I inspected for washout. Carwash pumps are like kids, they all have different personalities.

I checked all the valves before I changed the regulator. The tip is about a month old. Pulsates a little on both. Haven’t checked to see if it’s bleeding back, I’ll do that tonight.

Thanks Randy, I Replaced the pressure regulator but it did not correct the problem.

Had a cat 310 with low pressure. I put in a new seal kit and it ran at 1200psi for about 2 weeks. Now it runs at 1200 till you squeeze the handle then drops to 900. Head problem? I inspected the head for wash out issues and it looks OK. Pressure regulator looks OK but is old. Any suggestions...

had a new Hamilton Commander installed last week and so far I really like it

Anyone out there using the new Commander by Hamilton? If so, what do you like or dislike?

I would like that, I will PM you my number and we will set that up. Thanks

I’m looking at upgrades and the oasis xp is on my short list. I don’t know anyone who actually owns one and while I like what I see in videos I would like real world opinions. If you are an owner of a fairly new oasis xp then I would like to hear from you. What’s good, what’s bad, ease of...

Hey dirks99, I was wondering which you chose, why you chose it, and how you like it. I am thinking about a new IBA and those are my two choices. I own 2 D&S machines and their support is poor at best but the machines are pretty simple. Easy repairs and finding parts local is important to me...