Search results

Now on to the next issue, in order for the auto sentry to accept the next wash it needs to see a wash open and wash not busy signal from the ryko which is wash open output # Y4 and wash busy # Y2 from the plc which is working fine but the auto sentry needs to also see a wash open signal go low...

Thanks for the input I have found the fix.The auto sentry is capable of sending more than one pulse to each wash package I have three preprogrammed packages with different options. #1 out from the auto sentry pulse arms every package with a 2 pass arming. # 2-4 out from the auto sentry pulse...

ok after one ryko tech disconnecting with me today I did have a chance to talk to a second tech that sounded a bit green but was at least nice enough to hear me out what I have found is that #1 with any wash package I must send a pulse to arm a 1 pass or 2 pass wash input 30 or 31 . # 2 I must...

need some help! purchased a used RYKO select a wash,half way into stripping the unit down for refurb I decided to do away with the select a wash components and use as a soft gloss. I have replace the AMTT with an ICS auto sentry flex, and down to the input wiring I'm confused about the arming I...