Search results

Could be your dilution ratio maybe you need more product in your tank. If you have foamers make sure their clean or that the material inside them is still there. Had a similar issue and when I opened up the foamer it was empty. Also make sure your getting could product flow after the solenoid...

First time I've seen this. I don't think there is a tunnel out that will take these guys.

Are you thinking LED options?

Change your tip in your hyrdomider. Quick way to see if it is your tip is to poor more tri foam directly into the tanks and go turn it on in a bay.....if it seems to thicken up then your mix is thin. Otherwise changing the tip your going to have to wait a little as the tank empties, fills...

Just one bay or all the bays?

Make sure your getting air when turned on. Do you have foamers? Make sure their cleaned and not empty. I know some don't use them but I do. When I product was runny I found out the material inside the foamer had disintegrated. Also you can try making your mix stronger, more product

On the OP, is that 2 different ss washes next to each other???

I used a place here local, Nationwide Changer Service, for changing the belts and overall cleaning......$138.00

Interesting I have a small weld shop so I was going to have my guys fabricate me something simple with 4 anchor bolts Who makes this bracket? Foes KR stock it?

When you say it won't fit is it because the support bracket that goes across the machine? Both the RNS and DRS have them. I was planning on cutting it out.

That interesting can you send me pictures of your setup? I am thinking of doing the same thing, a vacuum and next to it either a shampoo machine or fragrance machine. What type of combo units did you have?

Yeah I would be curious what today's cost and where your located? I have no plans to build but just curious

Yes sir already have that but don't use it bc the hopper runs out before the stacker is full

Well coach hopefully she will be darn near empty before she jams 🤑🤑🤑

So was in a repair shop earlier today and came across an oversized Hamilton hopper. Anyone use these in their machines? Pro's Con's?

Those don't look that bad...I have seen alot worse than that.

I would use 90⁰ connections "from the pump" and "to the wand"

Personally I think your going about this wrong....is your site busy enough to justify an iba? Just bc one was there doesn't mean you should go back with one. Are there people in line in your ss bays that you need to wash more cars? Overall since you rehabbed the since has business been climbing...

So their saying the pepper scratched the hood of the car with the gun? Doubt it unless you video shows you something. Might want to up your cameras area your prepping area just to avoid this. I'm calling bs just trying to get you to fix the car. Had similar situation where customer went as far...

Prewasher..... meaning your prepper???