Search results

I should add that I tried to upload the surveillance footage but it is too large of a file. I downsized and shrink it to the point that it was not worth uploading.

Yes that picture is a bit deceiving. The door did not blow open. I opened it after the fact. The extreme heat caused that sticker to deform. There was no sign of fire down where the air comes in from the hose. If you watch the entire surveillance footage you can clearly see the fire slowly...

Yes that picture is a bit deceiving. The door did not blow open. I opened it after the fact. The extreme heat caused that sticker to deform. There was no sign of fire down where the air comes in from the hose. If you watch the entire surveillance footage you can clearly see the fire slowly...

Yes that is on the vacuum that did not burn. The vacuums that burned were pretty charred.

Hello all. I recently purchased some vacuums from Premier and two of the three started on fire. I took the dome off the third one to find a broken cooling fan on one of the motors. It is convincing to me that this is what caused the fires. The vacuums that burned had two of three cooling fans...

I am also paying this 9% fee. This is quite high for the credit card industry. Any advise from those near 4% on how to achieve this rate? Do they lower your rate if you prove PCI compliance?

Any updates on long term effect of no trash cans? Particularly at the vacuums...

I have also considered returning their missing items, with the address all over the papers inside the trash bag it was tempting. I decided to contact the police and let them handle it instead. (Hopefully they did) I have no trash cans at my wash but see the benefit of having them, particularly...

Thanks!

I am curious how many minutes they get at that price?

This is probably a dumb question but can any one tell me what is the target hardness after running through a softer for a car wash? I would assume (yes I know the three words in assume) it would be 0... Is this correct?

Carwash consignment has a lot of used equipment. I can’t speak to the quality of what you might get though.

Perfect. I have a QT54 on order. Hopefully comes next week. Thanks guys for the help.

Excellent. Thanks! I have the specs for the Auto, but didn’t know what I need for each SS bay. I have flojet pumps.

How many CFM for a 4/1 setup?

What CFM should I look for with a 4 SS 1 IBA setup?

Any way to mount the booms front and back instead of side to side? I was thinking I could get longer booms this way but it appears they will not clear unless pointed directly away from the other boom... Already bought the longer Mosmatic Z booms 😞

Is it ok to use aluminum for my multi conductor to the bay box from the equipment room for my self serve bays?? Didn’t realize it was aluminum until I started stripping the wire to connect...

Thanks! Will do.

I’m putting mine above the bays. I have a question for some of you with more experience than me. Do I need a check valve on the manifold where my high-pressure line feeds in? Or do I only need to check valves on the low pressure lines?