Search results

I picked up a used fragrancer and a shampooer. They are just boxes with no stand. I wanted to mount them either to some Coleman supervac3 or on a pedestal. Question is 1) which would be recommended, 2) where could I get suitable pedestals or do I have to fabricate? mounting near or on the...

Hi I was wondering if you figured out which coin acceptor you went with and how it worked? Was looking to upgrade my 4 bay to dollar tokens and customer quarters, and I wanted something reliable in Michigan.

I ended up going to a locksmith, got a 3/8 cam lock and I ordered extra long straight latches. I cut them down to get a tight latch. I

Hi guys. Any of you who have a super vac 3 from Coleman Hanna - could you tell me the depth of the cam lock on the panel? There are 2 per vac. I think it’s a 3/8 because the panel thickness is about 1/8 inch and the latch is 16ga sheet metal. But wanted to check an actual install before I...

So you just bypassed the non-functional one? I had thought of trying to get a slightly newer Mitsubishi plc that had more functionality (eg networkable) even if I could get one and follow this procedure, I’m not sure how I’d test it….

Which new plc did you end up going with?

Curious what plc you used as replacement? Mine is acting weird - other bays foam brushes start up when one is used. Intermittent problem and I think it may be time. After all it’s almost 20 years old!

Thanks for all your replies! It ended being a missing wire nut at the end of wire #7 that allowed the wire to contact the metal timer enclosure. Bay is back up and running!

I have a led 6 timer with Cryptopay on count up. Today the timer just stuck with the display stuck on “aux”. According to Dixmor, Aux is for AUXILIARY INPUT (yellow/black wire #7) a pulse single longer than one second will show `AUX` on timer. Is the long pulse a sign that the crypto swiper...

Thanks- really appreciate all your advice.

Hi all Looking for a recommendation on a presoak chemical to use in a self-serve. I have a Ryko signature series pump bench - 4 bays. My chemicals run through the high pressure wand and the presoak cycle triggers a solenoid for low pressure - 100 to 500 psi depending on how I set the...

Does anyone have experience with old graffiti? I’ve used tagaway that takes a bit away but still leaves a shadow of the graffiti.

The luck was getting the finesse without any practice.

Followed advice but it only worked on 2 of 3. The first one likely I’m needing a need vault door…

Stroke of luck and I got one open. Success rate improved from there

No dice so far. If anyone has a picture of the inside and back side of the vault door would be immensely helpful so I can see which way to turn and how deep to grind etc. thanks!

Does anyone know how to open the coin door lock with out a key? Got 4 vacs with no coin door key. Drilled out the antidrill ring so far. But I’m not familiar with the latching mechanism so I don’t know which way to turn. would prefer to do it without getting medieval on it but patience is...

What replacement plc did you go with?