What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Adding foaming agent to Simoniz Ceramic?

C

Cwajciec

Member
I will be trying Simoniz Ceramic Sealant on a 6 bay self serve soon. I plan to run it through the HP gun at about a 200:1 final dilution. I'm anticipating this won't show anything on the car, so I was thinking of adding the Simoniz foaming agent to show that it's working. Does anyone know if this will interfere with the performance of the product? Has anyone else done similar with Ceramic in SS bays?
 
I would not mix anything with that product at all, we use simoniz foam additive for our presoaks and it would definitely hinder the product, make it not as hydrophobic, mess with the ph, and leave spots on the vehicles. Simoniz foam additive is for products before the HP Rinse, not for waxes and ceramics. just my two cents!
 
We run JBS foaming ceramic in our SS bays, and at 1 location it doesn't foam as good as our other locations. We use lauramine oxide bought off amazon to increase foam at that location. We dual inject at the hydrominder. Works well for us in that situation - easy to get and use.
 
National Automotive Chemical makes a tri foam polish ceramic now because we asked for one. We use them in our three at a time tri foam gun in the self serve.
IMG_20250905_145431501.jpg
 
You must log in or register to reply here.
Back
Top