Adding foaming agent to Simoniz Ceramic?

[Cwajciec]

I will be trying Simoniz Ceramic Sealant on a 6 bay self serve soon. I plan to run it through the HP gun at about a 200:1 final dilution. I'm anticipating this won't show anything on the car, so I was thinking of adding the Simoniz foaming agent to show that it's working. Does anyone know if this will interfere with the performance of the product? Has anyone else done similar with Ceramic in SS bays?

 

[Car Wash Man]

I would not mix anything with that product at all, we use simoniz foam additive for our presoaks and it would definitely hinder the product, make it not as hydrophobic, mess with the ph, and leave spots on the vehicles. Simoniz foam additive is for products before the HP Rinse, not for waxes and ceramics. just my two cents!

 

[AnalyticWash]

Why don't your run a ceramic that has a foaming aspect already in it?

 

[Keno]

We run JBS foaming ceramic in our SS bays, and at 1 location it doesn't foam as good as our other locations. We use lauramine oxide bought off amazon to increase foam at that location. We dual inject at the hydrominder. Works well for us in that situation - easy to get and use.

 

[OurTown]

National Automotive Chemical makes a tri foam polish ceramic now because we asked for one. We use them in our three at a time tri foam gun in the self serve.

 

[Blanco]

National Automotive Chemical makes a tri foam polish ceramic now because we asked for one.

Can you please call my chemical guy and ask them to give Blanco a better discount? Appreciate it. Thanks in advance our town!