Hello Everyone: I’m using a Ryko SoftGloss Maxx 5 with a ColorWave application that’s generally performing well. We’re dispensing Carnauba wax, and water rinse during the reverse pass through through the rain bar.
However, during the drying pass, I’m still seeing a few diluted product residue and water droplets coming from the rain bar on the car, which has been frustrating. They are other passes before the dryer kicks in.
To address this, I’ve already:
- Installed check valves on both ends of the rain bar
- Inspected and cleaned the foam generator (everything looked normal)
Despite these steps, the issue persists. Is this residual dripping typical for rain bars, or is there something else I should check?
Would really appreciate any insight or suggestions. TIA.
However, during the drying pass, I’m still seeing a few diluted product residue and water droplets coming from the rain bar on the car, which has been frustrating. They are other passes before the dryer kicks in.
To address this, I’ve already:
- Installed check valves on both ends of the rain bar
- Inspected and cleaned the foam generator (everything looked normal)
Despite these steps, the issue persists. Is this residual dripping typical for rain bars, or is there something else I should check?
Would really appreciate any insight or suggestions. TIA.
