What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Wash select II locks up?

I finally ripped the WS11 out and put in a gold line and no more problems going on 8 years now! I replaced every part in the WS11 and problem never resolved … maddening … good luck tracing it down.
 
Almost every time this has happened to me it is eventually traced back to a power issue. Either a connector is corroded or something is drawing too much power. I've got one now that I have to bang on the back of the unit where the power supply is located and it will work for a couple months. A friend of mine re-landed all wire on the power supply connections and his problems went away.
 
Yes the old Fonzie trick works everytime at least temporarily lol 😂. That worked on mine also. I never did run new wiring to it at that point I was over chasing the ghost.. but I’d guess that’s the only thing I didn’t try
 
You must log in or register to reply here.
Back
Top