Hi all! Having issues with my spot free. The production side and the outgoing side. Contactors are kicking on and off. The controller in my JC Super Saver is showing inputs when the SF is engaged in the bays and the output 0 on the Sysmac goes on then off. When I engage the float switch to produce more SF I get input 2 to light up, but again no output, or off and on. I can get them to run for minutes at a time then they go back to kicking off and on within 5-10 seconds. After a while they shut down totally. At this point I’m thinking either something completely random and basic, or the controller. Everything else in the wash is working fine. Any help would be much appreciated! Time to walk away for a bit and reset my mind! Thanks!