Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Waxman's latest activity
-
Check the solenoid bank "common" white wire. Double check your hydrominder. put some solution in a measuring container and put the line... -
My bay clearance arch is 84" and a few inches shorter than the IBA will take. I'd rather a customer take out the clearance arch than the...
-
Waxman replied to the thread new here but need advice with leather.i'd start with something mild like this...
-
I've had this happen in freezing weather, usually immediately after a rain. The next time it happens, pull a wire off each switch, one...
-
I’m sure it has happened but I am guessing it is relatively rare. There is always a segment for automatic users, and even if the wash...
-
I’d match the opening of my bay to what my machine will wash. No sense making the bay bigger if the machine will not allow. If you...
-
Exactly what's Eric said start at the mix tank and work your way toward the pumps. Im assuming your valves are okay bc otherwise you...
-
Before..... After
-
So after a couple weeks of playing with my hot melt crack sealer score from Facebook Marketplace. Cutting out some decaying sections...
-
Looks great! I’m thinking king about doing the same to get a few more years out of my 20 year old asphalt.
-
Is the hydrominder drawing chemical properly? Low water flow won’t create enough vacuum to create the Venturi effect that draws the...
-
One of my biggest life changes since leaving the business was driving the other morning - It was raining - and I did not care! Then...
-
I think your best route would be to clean out the holes that the valves are in, clean up the valves a little bit and do what Blanco has...
-
Waxman reacted to Tylersizemore5's post in the thread WW Razor - Tips for changing HP hose with
Like.
Easiest way to do this is get you an adapter and attatch the old hose to it and where the bend in the e chain is closest to the machine...
