What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

PEI's latest activity

  • P
    PEI reacted to Buckeye Hydro's post in the thread Equipment Room Dream with Like Like.
    Agreed... and one thing to add. This is rarely done, and it should be done all the time. Have your plumbers add sufficient unions such...
  • P
    PEI reacted to washnshine's post in the thread Looking for a IBA builder, Metro Detroit MI. with Like Like.
    I don’t know anything about your area, but I’ve not seen a builder that constructs buildings and installs equipment. Generally, you...
  • P
    PEI replied to the thread On board vs Freestanding dryers.
    Since through put isn't an issue, I would do the onboard and put every pass through the inverted L. I would want the equipment installed...
  • P
    PEI reacted to Eric H's post in the thread Neighborhood car wash business with Like Like.
    I expect crabby responses from Randy but when you get a negative comment from Wax-dude I get concerned. You could have just used the...
  • P
    PEI reacted to Randy's post in the thread Neighborhood car wash business with Like Like.
    Here’s what you need a for a neighborhood car wash. A commercial grade ¾” garden hose, at least 100’ long. 4 good quality wash mitts, 4...
  • P
    PEI replied to the thread LW4000 fault start wheel well.
    The Undercarriage Eye Fail will cause the Undercarriage to come on as soon as the wash is fired. It's usually the photo eyes mounted on...
  • P
    PEI replied to the thread LW4000 fault start wheel well.
    The Undercarriage Eye Fail is a separate issue from the Start Wheel Well. The Start Wheel Well is what has the bay shutdown. Originally...
  • P
    PEI reacted to Randy's post in the thread Foam brush system with Like Like.
    I use an MX-8 with the 2 sec. delay so when you spin the rotary switch it doesn't jump on.
  • P
    PEI reacted to Randy's post in the thread Foam brush system with Like Like.
    Before you replace anything is the pressure switch starting and stopping the pump motor. You might need to readjust or replace the...
  • P
    PEI reacted to Keno's post in the thread Foam brush system with Like Like.
    flojets work well for FB and basically every thing in a self serve system.
  • P
    PEI reacted to Fluffybunny's post in the thread Monthly program hardware - Dencar etc with Like Like.
    Well said, Blanco. If you are washing over 30,000 cars a year with IBA you don’t need memberships. Plus stacking becomes an issue...
  • P
    PEI reacted to Blanco's post in the thread Monthly program hardware - Dencar etc with Like Like.
    Why not just don’t do memberships? You’re not a tunnel so you can’t process 1500 - 2000 cars a day. There no sense in spending 20-40k to...
  • P
    PEI reacted to Blanco's post in the thread Help with 240 v single phase wiring with Like Like.
    For standard rotation: One hot leg goes to wires 1+8 Second hot leg goes to wire 4 Wires J + 5 in motor need to be wired together...
  • P
    PEI reacted to Roz's post in the thread Cat310 Pressure Drop with Like Like.
    Curious how your reading was consistent with trigger pulled. Not familiar with JC’s system. An 08 on our KleenRite system would show...
  • P
    PEI reacted to washnshine's post in the thread Chemical Distributors with Like Like.
    Are you looking for a distributor or manufacturer? I know you said distributor, but a lot of operators like a specific brand or maybe...
Show older items
Back
Top