Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
PEI's latest activity
-
PYou more then likely have a solenoid valve problem. Try turning off your weep water supply and see if stops. I have solenoid valves on...
-
PI'm finding that people out of manufacturing automation with the 3 phase motor, conveyor, hydraulics, have the best experience...
-
PI’ve been in the Bill Changer repair business for a long time and I don’t know of a bill changer like what Keno is talking about. Do you...
-
PDefinitely do tap and swipe. Only problem with using cryptopay is a pre auth charge. Expect to get phone calls and bad reviews depending...
-
PAgreed... and one thing to add. This is rarely done, and it should be done all the time. Have your plumbers add sufficient unions such...
-
PPEI reacted to washnshine's post in the thread Looking for a IBA builder, Metro Detroit MI. with
Like.
I don’t know anything about your area, but I’ve not seen a builder that constructs buildings and installs equipment. Generally, you... -
PPEI replied to the thread On board vs Freestanding dryers.Since through put isn't an issue, I would do the onboard and put every pass through the inverted L. I would want the equipment installed...
-
PI expect crabby responses from Randy but when you get a negative comment from Wax-dude I get concerned. You could have just used the...
-
PHere’s what you need a for a neighborhood car wash. A commercial grade ¾” garden hose, at least 100’ long. 4 good quality wash mitts, 4...
