Recent content by John_Thomas

**Update** Ok, so I took the assembly apart and what I found out the counting wheel is nothing more than a 5.5x1.5 plastic lawnmower wheel. I found one that would work at Home Depot of all places. $4.99 later My machine is up and running and the counts are spot on. No need try to replace the...

The wheel is wobbling a bit as it goes down thr track. It looks like the shaft has hollowed out the wheel hole a bit. Granted it not very much but it has some play in it. Also. It looks like it is only counting three sprockets on the wheel missing every fourth one. I do not know if this iis...

hello all, does anyone have any experience with a bad counting wheel? My water wizard is initiating different cycles at the same time in the middle of a wash. My counting wheel has a little play in it and when I run it up and dwn the track the prox flashes are not consistent. Coleman only item...

Hello all, The presoak on my WW 1.0 doesnt start coming out until it is over the hood. Could there a solenoid problem somewhere? I havnt seen any leaks anywhere either. Any suggestions wold be greatly appreciated. Thanks John

Hi guys, Sorry for the long delay in response. I tried to reprogram and now it is givng me a tube error which prevents me from going further. I have a place not far from me that can repair it. Also, Can someone help me order some numbers and letters for my selections? Over time the get hard and...

Hi Randy, i have not tried to program it. I will download the manual and go from there. Any tips on programming Thanks John

My MEI CF7000 will not accept quarters. It says unknown coin. Can someone help me with this issue? Thanks John

Thank you CFCW! I use 0503s everywhere. It saves a few gallons. Most of my washes include a rocker panel blaster so I figured they got plenty of impact anyway.

Paul, I have 14 cameras on my site and maybe I wasnt clear enough in my post. They are not the same people over and over again. I actually bought a license plate recognition camera the last time it happened and I happen to have gotten their plate number from last night. The thing Im concerned...

Ok guys, I get broken into about once a year. The thieves use a crowbar and punch through the bill accepter to get leverage and pull door open every time. It used to be a single bay but now they are hitting multiple bays. My question is would it be better to just not have bill acceptors and...

Slash, Outside of the timer bracket, does existing wiring plug right in? Any other mods? Thamks

Silly question guys, what tips go where. I bought all new tips and noticed they are all over the place. Thanks for quick response. John

I am still trying to wrap my head around this but I appreciate all the feedback so far.

I have a jc 1034r timer, mei ae2412 bill acceptor and a sesatron coin acceptor. The coin acceptor has four wires, red, red w/gray stripe, black, and yellow. Those four wires are tied into the loom.

There is a place about 30 minutes out of Oklahoma city I take mine to for repair Nd reprogramming if a new bill comes out. Any chance you lost power? Sounds like it lost part of its programming. I can leave mine unplugged for a few days, plug it back in and it will work, but only for a short...