hello everyone. im a newbie here! Im having an issue with my simulated pulse staying on. its a drb system. ive gone to O and press acknowledge button and shut it off yet it continues to flash simulated on. drb says it might be a bad censor. anyone experience this problem and what the solution might be?
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
simulated pulse issue
- Thread starter goldberg
- Start date
Washmee
Fullservice Tunnel
Have you repaired the issue that caused you to turn on the simulated pulse? Are you sure you are actually turning it off. Use the enter button to highlight the option in other operations page that says enable/disable simulated pulse. Use the =/- key to toggle between on and off. If you are toggling the simulated switch to off, you would be seeing pulses from the actual pulse switch at that point. If you turn it off and don't see any pulses on the tunnel status screen when the conveyor is running then the actual pulse switch is not working. What type of pulse switch do you have?
Earl Weiss
Well-known member
Use the enter button to highlight the option in other operations page that says enable/disable simulated =/- key to toggle between on and off<<<
As he said Acknowledging errors will not turn sim pulse on or off. You were on sim pulse because?
Earl Weiss
Well-known member
That is probably because it is your enter switch that measures the car. As long as the conveyor is set to the correct speed, it will start and stop functions at the correct time. Just don't adjust the conveyopr speed.
