I am new to the ss car wash business and my main question now is about setting up my soap injection. I have a soap tank that sets higher than the pumps. It comes out of the tank with 3/4 pvc and runs over to the pump stand where they have it reduced to 1/4" pipe, it runs through a valve and into the injection port on a 323 Cat pump. Do i need to dilute the soap that is in the tank or do i need to regulate the amount of soap at the pump (using the valve or ?) Thanks for any and all help.
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Injecting Soap
- Thread starter cjaj70
- Start date
Yes it is diluted in the Soap tank. Normally you’ll have a Hydrominder in the Soap tank that soap is drawn into from the concentrated soap pail and is mixed with water in the Hydrominder. To raise or lower your Soap concentration you change the colored tip sizes. You’ll have a solenoid valve on the pump to start and stop the system of soap.
If your 60:1 in the tank you will be 600 to 900:1 at the wand......
