What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Mosmatic Comfort Hose

OK, here ya go Nick-same gun and bay for changeover and pressure tests to keep things consistent. Bottom line, essentially the same performance as the comfort hose. The 1/4" WB does feel slightly clunkier than then mosmatic, but still much better than a 3/8"

I'd say the 1/4" is worth a shot, especially for those concerned with durability or theft. I'm gonna get my wife to give me an assessment.

KR part # HA124WBL0606 12' ft 1/4" single braid hose with 3/8" MPEBOMP90089 mosmatic comfort hose 3500mm
length12'11.5'
weight2.16 lbs.98 lbs
low pressure changeover time10.5 seconds10.5 seconds
pressure at nozzle940psi935 psi
cost$26.81 + 2.14 for each hose guard$37.62
 
Last edited:
Greg Pack said:
OK, here ya go Nick-same gun and bay for changeover and pressure tests to keep things consistent. Bottom line, essentially the same performance as the comfort hose. The 1/4" WB does feel slightly clunkier than then mosmatic, but still much better than a 3/8"

I'd say the 1/4" is worth a shot, especially for those concerned with durability or theft. I'm gonna get my wife to give me an assessment.

KR part # HA124WBL0606 12' ft 1/4" single braid hose with 3/8" MPEBOMP90089 mosmatic comfort hose 3500mm
length12'11.5'
weight2.16 lbs.98 lbs
low pressure changeover time10.5 seconds10.5 seconds
pressure at nozzle940psi935 psi
cost$26.81 + 2.14 for each hose guard$37.62
Click to expand...
What do you use to measure the PSI at the tip in the bay?
 
Greg Pack said:
OK, here ya go Nick-same gun and bay for changeover and pressure tests to keep things consistent. Bottom line, essentially the same performance as the comfort hose. The 1/4" WB does feel slightly clunkier than then mosmatic, but still much better than a 3/8"

I'd say the 1/4" is worth a shot, especially for those concerned with durability or theft. I'm gonna get my wife to give me an assessment.

KR part # HA124WBL0606 12' ft 1/4" single braid hose with 3/8" MPEBOMP90089 mosmatic comfort hose 3500mm
length12'11.5'
weight2.16 lbs.98 lbs
low pressure changeover time10.5 seconds10.5 seconds
pressure at nozzle940psi935 psi
cost$26.81 + 2.14 for each hose guard$37.62
Click to expand...
Thank you Greg. Great assessment. Let us know what the wife thinks. I think the 1/4" route is going to be better for my situation. I won't have to worry about someone cutting it and even if it's rare I won't have to worry about it kinking and stopping the weep in the winter. I did order a mosmatic hose just to try though. Wish they came in more sizes. I use 15' and 17' hoses in my bays and they come in 14' and 16'. I suppose if I like them I can make my 1 ft swivel saver hose a foot longer to make up for the difference. Appreciate the feedback sir.
 
Roz said:
What do you use to measure the PSI at the tip in the bay?
Click to expand...
I have a trigger gun and barrel. At the end I have a 1/8" street tee, then a 1/8" to 1/4" adapter that I have a pressure gauge on. I have a 2506 nozzle on the end. I use that to get close to 1000 psi at the bay with the trigger pulled. This ensures bay to bay consistency.
 
Last edited:
You must log in or register to reply here.
Back
Top