PDQ 360+ pass speed

[regansf]

Hi there, what pass speeds are popular for the hi and lo passes on your PDQ 360’s?
I’ve got my titrations correct, but looking for the correct ‘volume’ of product to be applied to vehicles. Blendco products. Thanks all.

 

[Monte]

Well....your injector is part of that equation. I use blue injectors and my cycle speed is usually 8-12 depending on seasonal factors. I was actually going to start experimenting with larger injectors so I could get my speeds up to 12-14. I usually slow the speed down on the back ( both Low and High) to compensate for the dirty tail.

 

[regansf]

Well....your injector is part of that equation. I use blue injectors and my cycle speed is usually 8-12 depending on seasonal factors. I was actually going to start experimenting with larger injectors so I could get my speeds up to 12-14. I usually slow the speed down on the back ( both Low and High) to compensate for the dirty tail.

thanks Monte, I’m running grey for hi and blue for lo currently, with speeds of 12 on hi and 9 on lo.