What's new

Air logic or Air shammee

Kimberly Berg

Well-known member
Joined
Jul 25, 2013
Messages
381
Reaction score
546
Points
93
Location
Citrus Heights CA
In 2018, I went with Diskin's Air Shammee II, that has 1 - 4.5HP motor, mounted on my 5 bay walls. Our dryers get a lot of use. $10k investment was paid off in 3 months (per hour meters). Over the past 4 years we have improved their system as we found flaws... It might be over-kill but it's eliminated complaints from customers and increased customer satisfaction!
  • Added SS elbow (from Mosmatic) because hose clamp was cutting into the hose.
  • Added plastic vacuum cuffs to the elbow with self-tapping screws to help the hose stay on the boom elbow
  • Upgraded the hose clamps on the hoses. The original ones weren't strong enough to tighten around plastic corrugated dryer hose.
  • Added in-line swivel (Mosmatic)on the boom plate because short hose would kink when the boom was used.
  • Replaced their nozzle with Air Logics nozzle. Diskin's nozzle has an inner baffle that restricts the air flow & the back pressure caused a lot of problems (holes in hoses, hoses blowing off the end of the boom, rivets falling out of the nozzle). Also, customers didn't like holding the trigger while using.
  • Upgraded their sign with liability risk due to higher air speed.
  • Remounted the boom bracket through the concrete bay wall using 10" bolts, to support the added weight and welded the boom sections together.
  • Added 3' boom extension (from Mosmatic) to reduce stress on the dryer hose & better reach over customers vehicle.
  • Upgraded wand holder
Here's a link that shows photos of the many improvements we've made -
https://www.dropbox.com/sh/zefimv2njxvsfhh/AADTfJy55tHvrx6cccHgqzi8a?dl=0
 

Roz

Well-known member
Joined
Oct 29, 2017
Messages
1,225
Reaction score
640
Points
113
Hi Roz, could you please check this link & see if you can view my photos?

I can view them without signing into my account so you should be good. We used to use a screw to secure the hose to the cuffs (on vacs) but they would tear the hose (over time). We now use plumbers glue around the hose that is to fit into the cuff or swivel. Cleaner look. Only negative is that we keep extra cuffs and hose swivels since we just discard the cuff if there is an issue. Customers still find ways to do crazy things with vac hoses. We also glue the claws to the swivels so prevent them from walking. No idea why someone would take a $3 vac nozzle. Thx for posting the pics.
 

Kimberly Berg

Well-known member
Joined
Jul 25, 2013
Messages
381
Reaction score
546
Points
93
Location
Citrus Heights CA
I can view them without signing into my account so you should be good. We used to use a screw to secure the hose to the cuffs (on vacs) but they would tear the hose (over time). We now use plumbers glue around the hose that is to fit into the cuff or swivel. Cleaner look. Only negative is that we keep extra cuffs and hose swivels since we just discard the cuff if there is an issue. Customers still find ways to do crazy things with vac hoses. We also glue the claws to the swivels so prevent them from walking. No idea why someone would take a $3 vac nozzle. Thx for posting the pics.
Thanks for your help Roz! Fortunately we haven't had too many vacuum claws disappear. But I'll remember your idea to use plumbers glue if we do!! :)
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,667
Reaction score
3,933
Points
113
Location
Texas
I'd love to, but I keep getting an error that my photos are too large. Do you know how to add photos or recommend software to link photos?
If you aren't posting them from your phone, open them with Paint, reduce the size to about 30% and save.
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,667
Reaction score
3,933
Points
113
Location
Texas
No idea why someone would take a $3 vac nozzle.
Mine disappear like crazy, mostly because people want to vacuum bigger trash like leaves out of their cowl so they just pull them off, or they get run over and crushed or split. They take the claw off and just throw it away.
 

AZcarwashman

Active member
Joined
May 5, 2015
Messages
111
Reaction score
102
Points
43
Location
Phoenix, AZ
Looking for advice on the better product of these 2. They are very close in price, I have a 6 bay that I'm looking to add these to in January. I have seen that Air shammee offers in attic mount that seems like it would be a better look and possibly less upkeep
I use air logic at all my washes, great product and massive air flow at the gun. I prefer their guns over the trigger system of air shammee, but honestly either way, you can’t go wrong. You’ll see a very nice increase in sales either way. Customers love the drying systems. One thing to consider is noise though. These things are loud. If your in a residential area, you’ll likely get complaints from neighbors especially for the late night users. I’d say you’d want to attic mount instead of bay mount if this is the case.
 

washnshine

Well-known member
Joined
Feb 21, 2014
Messages
1,751
Reaction score
1,192
Points
113
Location
NY

I.B. Washincars

Car Washer Emeritus
Joined
Aug 30, 2007
Messages
4,219
Reaction score
1,041
Points
113
Location
SW Indiana melon fields.
I noticed you have a round foaming brush in the bay - do you like those better than the traditional shape? Where do you buy them?
I'm not Kimberly, but I can comment on the round brushes. I had a friend tell me about a wash he used while vacationing that had round brushes. He told me he liked them a lot better, especially on the wheels. I changed one wash to them to see how customers felt about them. Most liked them better and a few were indifferent. I don't think I had anyone that didn't like them. I ended up changing all of my washes and never looked back. All of the major suppliers carry them.
 

Kimberly Berg

Well-known member
Joined
Jul 25, 2013
Messages
381
Reaction score
546
Points
93
Location
Citrus Heights CA
Nice bay dryer modifications, Kimberly - thank you for posting the pictures. I noticed you have a round foaming brush in the bay - do you like those better than the traditional shape? Where do you buy them?
I appreciate your compliment! :) We used to use the Universal rectangle hogs-hair brushes, but I'm always looking for ways to differentiate myself from other SS car washes. We experimented 17 years ago, and added them to a few SS bays. Customer feedback said they preferred the round brushes as they fit better in the wheel wells and smaller contours on cars. I purchase them from Kleen-Rite (Item #FORNDH). I prefer the Universal brand as the bumpers are made of rubber, and last longer than Erie's brittle plastic bumper.
 

Mr. Clean

Member
Joined
Oct 9, 2007
Messages
289
Reaction score
21
Points
18
Location
Central NY
Late to the party, but attic mounting is definitely the better way to go. Air will warmer and dryer - both pluses for a better customer experience.
 

Kimberly Berg

Well-known member
Joined
Jul 25, 2013
Messages
381
Reaction score
546
Points
93
Location
Citrus Heights CA
Late to the party, but attic mounting is definitely the better way to go. Air will warmer and dryer - both pluses for a better customer experience.
Depends on the dryer brand & model you buy, and width of your bays. If it's an Air Logic or older Air Shamee with 3 motors, you'll be getting on the roof more to replace the motors. I purchased the Air Shammee II with single 4.5 hp motor & very happy we mounted on the bay wall.
 

Attachments

washnshine

Well-known member
Joined
Feb 21, 2014
Messages
1,751
Reaction score
1,192
Points
113
Location
NY
Correct me if I am wrong, but I believe air pressure will decrease with hose length, and mounting the intake in the attic versus the bay will only reduce the pressure at the nozzle. Depending on bay height, location the the attic, etc., you could be adding (or saving) quite a distance according to where you install the intake.
 

Car_Wash_Guy

Well-known member
Joined
Apr 6, 2015
Messages
1,121
Reaction score
303
Points
83
Location
out west
I was thinking a potential con to installing in the bay is more stuff to clean that is attached to the walls? I have PVC and I get built up scum all the way to and including the ceiling and cleaning around wand holders, brushes, and bay timers is a PITA and this will be another item to clean and clean around?
 

Kimberly Berg

Well-known member
Joined
Jul 25, 2013
Messages
381
Reaction score
546
Points
93
Location
Citrus Heights CA
I was thinking a potential con to installing in the bay is more stuff to clean that is attached to the walls? I have PVC and I get built up scum all the way to and including the ceiling and cleaning around wand holders, brushes, and bay timers is a PITA and this will be another item to clean and clean around?
I was concerned about cleaning too. We mounted the motors & covers as HIGH as we could to clear the other booms. My bays are 15' wide and 9' high. The covers stay remarkably clean. I remove the covers 1x year to clean them & check the motors.
 
Joined
Mar 14, 2022
Messages
44
Reaction score
7
Points
8
Dylan,

"Carwash chronicles" by Chris Atkins posted a roof mount installation on YouTube about a year ago. Search for carwash revenue increase and his video will pop up
 
Joined
Mar 14, 2022
Messages
44
Reaction score
7
Points
8
Late to the party, but attic mounting is definitely the better way to go. Air will warmer and dryer - both pluses for a better customer experience.
Thank you, mine are Attic mounts. I went with air logics mainly because the nozzles. They will be delivered next week to my wash
 
Etowah
Top