What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Latest activity

Etowah
What's new Featured content New posts New profile posts Latest activity
  • OurTown
    OurTown reacted to Greg Pack's post in the thread Swap Santos for viton with Like Like.
    I've used Santoprene with some pretty corrosive chemistry and got more than that. Are you sure it's not something else like excessive...
  • OurTown
    OurTown reacted to Keno's post in the thread IDX LTT800 TO DIXMOR with Like Like.
    I've replaced all the led modules from digikey, MEP had posted the model numbers a while back. That makes a huge difference from the dim...
  • OurTown
    OurTown replied to the thread low pressure pre-soak question.
    It's just basically soap though. Last winter was the first time we had a tri foam system. We used a ceramic all winter but I would only...
  • M
    mcwashes replied to the thread Buying 1 in bay with 5 SS - not operational.
    Heyo - some updates since the last post. Bought the property and I've been busy with what I can get done. Have the plumbing completed...
    • 7635062692277372900.JPG
    • 1758624276684.png
    • 1758624257925.png
    • 1758624217810.png
    • 1758624196702.png
    • 1758624169386.png
    • 1758624151483.png
    • 1758624131069.png
    • 1758624100801.png
    • IMG_C10B95CD7FF1-1.jpeg
  • washnshine
    washnshine reacted to OurTown's post in the thread PDQ 360 with Like Like.
    Make sure all terminal screws are tight from the breaker all the way to the motor. If they are tight, then check for amp draw on each leg.
  • M
    mcwashes replied to the thread Wash Financing.
    Sorry for the delay. I haven't been on here in a minute since I've been putting in some manual labor hours at the wash. Here's one: Ed...
  • washnshine
    washnshine reacted to Greg Pack's post in the thread Swap Santos for viton with Like Like.
    I've used Santoprene with some pretty corrosive chemistry and got more than that. Are you sure it's not something else like excessive...
  • washnshine
    washnshine reacted to Keno's post in the thread Swap Santos for viton with Like Like.
    Flo-jets aren't really worth rebuilding, if you want viton, just buy new viton ones. Flojets need DRY air and they work flawlessly for a...
  • washnshine
    washnshine reacted to Randy's post in the thread Swap Santos for viton with Like Like.
    There are better options than using a Flo-Jet pump. Replace the Flo-Jet pump with a Procon Pump controlled by a IDX AT-MX8 controller or...
  • M
    mcwashes reacted to bNc's post in the thread Wash Financing with Like Like.
    Thank you Keno.
  • M
    mcwashes reacted to Keno's post in the thread Wash Financing with Like Like.
    If you have real estate as collateral, a small, local bank maybe your best bet. You may have to try a few to get a loan, but it should...
  • K
    Keno reacted to CaptnBuck's post in the thread RNS change machine problems with Like Like.
    Good news! After some sleep and a fresh look at it this morning, I found what caused the sparks. In my haste to fit it all back together...
  • C
    CaptnBuck replied to the thread RNS change machine problems.
    Good news! After some sleep and a fresh look at it this morning, I found what caused the sparks. In my haste to fit it all back together...
    • IMG_4141.jpeg
    • IMG_4142.jpeg
  • K
    Keno reacted to OurTown's post in the thread PDQ 360 with Like Like.
    Make sure all terminal screws are tight from the breaker all the way to the motor. If they are tight, then check for amp draw on each leg.
  • K
    Keno reacted to Greg Pack's post in the thread Swap Santos for viton with Like Like.
    I've used Santoprene with some pretty corrosive chemistry and got more than that. Are you sure it's not something else like excessive...
Show older items
Back
Top