What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Wash select 2 not detecting all pulses

Hi.

I’ve added Nayax to our wash select 2 but have an odd issue. At least once a day it’s charging the card and sending pulses, but will end up with “add $1 for <wash name>” on the WS2 display.

I’ve replaced the cpu board due it crediting a quarter as $1.68 (amongst other issues) and the I/O board as we had a couple of the screens fail. I’ve also replaced the ribbon cables that connect the two.
I’ve also replaced the board that sits between the Nayax and the I/O board.

Any suggestions as to how to resolve this?

TIA
 
Back
Top