Looking for information on the worth of stainless gantry. It’s in great shape with new shaft and bearings installed shortly before it was removed. I was thinking I may use it in another location but since had other thoughts. I am not dying to sell it but I have no idea of the current value. I’ve had another wash owner show interest but I need a fair starting point. Thanks
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Value of D&S 5000 stainless gantry?
- Thread starter Jim64
- Start date
MEP001
Well-known member
That's hard to say. You might be better off parting it out to get the most money. The spinner drops will sell, but I can't imagine anyone would need either the whole gantry or the main shell. In my experience, once it's been run into bad enough to bend the main gantry, everything including the rails is destroyed, and it's easier to rebuild the gantry in-place than to replace it.
