I bought a used TRU18 through the wall vending machine, everything is working except one of these connectors goes to the selection keypad and one goes to the control board. They are the only two lose connectors left, so I am guessing they should connect. But they don't. There maybe some missing adapter or maybe there are a couple of more connectors that are no longer on the machine. I'm looking for an owners manual/wiring diagram really anything that may help trouble shoot where the keypad plugs in and if not to this connector... where does it go?
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Tru18 Vending Machine manual / instructions / wiring diagram
- Thread starter Knight01
- Start date
OurTown
Well-known member
Is this it?
https://www.dultmeier.com/products/0.48.2513/13238
If so it is made by Raddatz Product Development and they have the manual on their website.
https://rpdvending.com/
https://www.dultmeier.com/products/0.48.2513/13238
If so it is made by Raddatz Product Development and they have the manual on their website.
https://rpdvending.com/
I think the Tru-18 is a rebranded LM-18 from RPD Corporation. https://rpdvending.com/ here’s the manual https://rpdvending.com/wp-content/uploads/2022/03/LM18-LM30-Manual-Replacement-1.pdf
I think that is the same, I could not find any info on it.
