One of my customers has one of these that was vandalized. Someone cut the wires in the pumping station control box. I spliced the obvious ones but need to know wher three of the wires from the terminal strip go to. They are labeled "FS", "33", and "V". Your help will be deeply appreciated. In fact your help may be my only source of information. Called the factory and they said, call the distributor. Well that guy was set up by Barry Boyd and has since vaporized, which is actually a good thing. They then said to call the other distributor in Florida. These people just went through a bankruptcy/reorganization and don't care less about another independent service company. So here I am with hat in hand looking for a hand out.
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Need assistance with a Wesumat/Mark 7
- Thread starter mac
- Start date
