ted mcmeekin
Fast and Clean
- Joined
- Aug 30, 2007
- Messages
- 412
- Reaction score
- 1
- Points
- 16
We have been chasing plc issue. First the side nozzles never turned on either during wash cycle or CMI test--the out put light did not come on either. After some discussion with distributer, we sent plc for repair--they did replace output device for side nozzles and checked out other I/O. Now side nozzles still don't work but light comes on during test AND UC works on test but not wash cycle. We have reconfigured wash options a couple times. We have not changed program chip.
Clues?
Thanks,
Ted
Clues?
Thanks,
Ted