lazerwash 360 plus errors are driving me NUTS

[poolenglish]

THIS IS DRIVING ME NUTS!
What do I need to test or replace?
We have 2 bays and errors on both bays !
Bay 2 has trolley drive fault AND bridge drive fault

AND

Bay 1 has Bridge node com errors.





BAY 1 errors



THIS IS DRIVING ME NUTS!
What do I need to test or replace? We have 2 bays and communication errors on both bays !
Bay 2 has trolley communication errors, and Bay 1 hasBridge node communication errors.

BAY 2 errors

 

[eckert16]

frustration comes across loud and clear... .
... just based on your description, ask yourself: what do these two bays share that could be effecting both bays

 

[poolenglish]

Well the both bays do not share anything at all and are independent of each other.
Ended up calling Sonnys (Chris is the ace tech) he found after hours of searching and testing
Bay 1... it was a bad worn out wire to the trolley motor.

Bay 2 ...it was a worn and wobbly arch pivot which was creating a bridge error from shaking the arch/trolley/bridge sensors.
All bays down for hours with unrelated errors.

BACK RUNNING, THANKS SONNYS AND CHRIS!

 

[Zal]

good news!